Title: Amberg Slab Track - Rail & Tunnel | Amberg Technologies
URL: https://ambergtechnologies.com/solutions-services/amberg-rail/amberg-slab-track
Description: Amberg Slab Track - Integrated surveying solution optimized for construction, monitoring and maintenance of slab tracks. Discover your benefits today! 

---

# Amberg Slab Track

Integrated surveying solution optimised for the typical requirements during construction, monitoring and maintenance of slab track lines

**Inspect track positions with millimetre accuracy – with the integrated surveying solution for the construction and maintenance of slab track.**

- High-precision systems optimally support the different slab track construction stages
- Real-time display of correction values for direct adjustment of track position and height
- Interactive, sleeper-based correction-data preparation
- Acceptance mode for proper documentation of final track position
- Comprehensive numerical and graphical reporting as a hand-out for contractors

**We are pleased to carry out your project**

In collaboration with our technology associates and in-house specialists, we provide state-of-the-art solutions and instruments tailored to your needs.

Contact us

[Downloads](https://ambergtechnologies.com/downloads/amberg-rail/brochures-data-sheets)

## Amberg’s Slab Track Solutions

### Amberg Slab Track GRP 1000

The Amberg Slab Track GRP 1000 system provides precise control for slab track installation and adjustment.

[→ Amberg Slab Track GRP 1000](https://ambergtechnologies.com/fileadmin/amberg-technologies/downloads/Rail/Brochures/Amberg_SlabTrack_GRP_1000_Datasheet_EN.pdf)

### Amberg Slab Track IMS 1000 / 3000

Control of the Slab Track at high speed

[→ Amberg Slab Track IMS 1000 / 3000](https://ambergtechnologies.com/fileadmin/amberg-technologies/downloads/Rail/Brochures/Slab_Track_IMS_1000_3000_Datasheet_EN.pdf)

### Amberg Design Creator

Transform track geometry survey data into a precise, best-ﬁt alignment.

[→ Amberg Design Creator](https://ambergtechnologies.com/fileadmin/amberg-technologies/downloads/Rail/Brochures/Datasheet_Design_Creator_2025.pdf)

### GRP System FX II

The Amberg GRP System FX II is a new-generation measuring system manufactured based on the well-proven GRP System FX.

## Frequently Asked Questions

Amberg Rail Slab Track is the Amberg Rail module for setting out slab track in real time and post-processing track data measured with the GRP System FX. It contains the Slab Track Plus module, which supports final acceptance reporting of the as-built track position and other track parameters. The module is licensed on the Amberg Rail dongle.

Amberg Rail Slab Track supports setting out and final acceptance on new lines and maintenance on existing lines. During setting out, the track is moved into position while design deviations are shown in real time. Acceptance follows after the track is fixed in concrete, is repeated where correction plates changed the position, and is merged into complete reporting.

In Amberg Rail Slab Track, slab track adjustment (setting out) is always done with a GRP 1000 trolley and a total station (TPS). Slab track acceptance can be measured with the GRP 1000, the IMS 1000 in Single or Multi CP mode, or the IMS 3000. Both job types use design data sets and absolute control points.

During slab track adjustment, Amberg Rail Slab Track shows live height and position deviations of the left and right rail, gauge and superelevation deviations, the leading rail, the current design elements, the calculated stationing, the distance to the total station, lock and battery state, and a colour-coded graphic of measured and planned adjustment installations.

The automatic compensation mode in Amberg Rail Slab Track is used when measuring starts where the track is already fixed. Small deviations caused by total station setup inaccuracies are set back to zero and applied linearly over the following track, with a length of 15 m per millimetre of error, so the track position stays smooth.

Amberg Rail Slab Track has an overlapping check that compares the current measurement sequence with the previous one and lists horizontal and vertical deviations of the overlapping points. At least one new track point must lie within already measured track. You can accept the result, re-measure the setup, or export the deviations and setup information to an ASCII file.

Amberg Rail Slab Track derives final corrections per rail head in position and height in the track view. Corrections are usually set on the leading or height-reference rail first, then on the other rail for gauge or superelevation, with out-of-limit values shown in red. The correction list can be printed or exported to ASCII for the construction company.

Yes. For IMS 1000 and IMS 3000 acceptance jobs, Amberg Rail Slab Track offers a Measurement Preview once at least two known control points are recorded. It shows horizontal, vertical, superelevation and gauge deviations from design against the slab track limits of the configuration set, so integrity and completeness can be verified on site.

Yes. In slab track adjustment with the GRP 1000, the temperature entered in the new setup dialogue is used to correct the measured gauge with a correction curve. This curve represents the deformation differences between the GRP System FX trolley and the steel-reinforced concrete used in slab track construction.

Amberg Rail Slab Track exports track data to tab-separated ASCII and to LandXML for reuse as design data, and creates graphic reports and text reports for deviations, deviation changes and twist. The control point editor offers further exports and reports, and a Track Geometry Record licence on the dongle adds a TGR view with exportable graphs.
